Dial Gage Stands - SERIES 7 / Transfer Stands - SERIES 519
These Dial Gage Stands and Transfer Stands are designed for comparison measurements of height using a dial indicator or Digimatic Indicator.
___Dial_Gage_Sta_49d4e88834b34.jpg
Rating: Not Rated Yet
Description
FEATURES
• Vertical travel of the gage holder — Dial Gage Stand: 100mm (4"), Transfer Stand: 335mm (13.19")
• Fine-adjustment of 1mm available for zero-setting of the indicator.
• With an intercgangeable anvil. Domed anvil (101463) is optional.
| SPECIFICATIONS | |||
| Metric | Dial Gage Stands | ||
| Order No. | Applicable holding stem | Mass | Remarks |
| 7001 | ø8mm | 4kg | w/Serrated anvil (101462) |
| 7002 | ø8mm | 4kg | w/Flat anvil (101461) |
| Inch | Dial Gage Stands | ||
| Order No. | Applicable holding stem | Mass | Remarks |
| 7003 | 3/8" DIA. | 8.8 lbs. | w/Serrated anvil (101462) |
| 7004 | 3/8" DIA. | 8.8 lbs. | w/Flat anvil (101461) |
| Metric | Transfer Stands | ||
| Order No. | Applicable holding stem | Mass | Remarks |
| 519-109M | ø8mm | 7.5kg | w/Serrated anvil (101462) |
| Inch | Transfer Stands | ||
| Order No. | Applicable holding stem | Mass | Remarks |
| 519-109E | 3/8" DIA. | 7.5kg | w/Serrated anvil (101462) |
