Absolute Digimatic Bore Gage - SERIES 511
SERIES 511This absolute Digimatic bore gages are exclusively designed for IDmeasurement.
Description
FEATURES
- The minimum value holding function provides the easy of detection of hole diameter.
- Up to three sets of master value and upper/lower tolerance value can be memorized.
- An analog bar indicator is integrated to enhance the intuition in reading.
- GO/±NG judgment is performed by setting the upper and lower tolerances.
- Up to four rods can be used (500 mm (20") extension rod). The unit is also compatible with 250 mm (10") extension rods.
Technical Data | |
Display: | LCD |
Functions: | Origin-Set (preset), Zero-Set, power on/off, inch/mm |
conversion (inch/mm type only), SPC data output, GO/±NG | |
tolerance judgment | |
Battery: | SR44 (1 pc.) (938882) |
Battery life: | Approx. 9 months for normal use |
Alarm: | Low battery voltage, scale contamination, over-flow error, |
tolerance limit setting error | |
Dust/Water protection level: | Conforming to IP53 |
Operating temperature: 0°C to 40°C |
SPECIFICATIONS | ||||
Metric | ||||
Resolution | Range | Order No. | Probe depth | Mass |
0.001mm | 45 - 100mm | 511-501 | 150mm | 500g |
Inch/Metric | ||||
Resolution | Range | Order No. | Probe depth | Mass |
0.001mm | 1.8 - 4" | 511-521 | 6" | 1.10 lbs. |