V-Anvil Micrometers - SERIES 314, 114 — 3 Flutes and 5 Flutes
SERIES 314, 114 — 3 Flutes and 5 Flutes
V_Anvil_Micromet_49d4df20339df.jpg
Rating: Not Rated Yet
Description
FEATURES
• IP65 water/dust protection level (314 series).
• Measures the outside diameter of cutting heads (such as taps, reamers, end mills) with an odd number of flutes.
• Carbide-tipped spindle.
• With Ratchet Stop for constant force.
• V-anvils with a centerline groove are available. They are useful for measuring pitch diameters of taps which have a small diameter by using single-wire method.
• Supplied with a standard for zero point adjustment.
• The 314 series (LCD readout type) is provided with SPC output.
| SPECIFICATIONS | ||||
| Metric | Digital model for 3 flutes cutting head | |||
| Range | Order No. | Resolution | Accuracy | Remarks |
| 1 - 15mm | 314-251 | 0.001mm | ±4mm | w/Groove |
| 314-261 | 0.001mm | ±4mm | — | |
| 10 - 25mm | 314-252 | 0.001mm | ±4mm | w/Groove |
| 314-262 | 0.001mm | ±4mm | — | |
| 25 - 40mm | 314-253 | 0.001mm | ±5mm | — |
| Excluding | ||||
| quantizing error | ||||
| Inch/Metric | Digital model for 3 flutes cutting head | |||
| Range | Order No. | Resolution | Accuracy | Remarks |
| .05 - .6" | 314-351 | .00005"/0.001mm | ±.0002" | w/Groove |
| 314-361 | .00005"/0.001mm | ±.0002" | — | |
| .4" - 1" | 314-352 | .00005"/0.001mm | ±.0002" | w/Groove |
| 314-362 | .00005"/0.001mm | ±.0002" | — | |
| 1" - 1.6" | 314-353 | .00005"/0.001mm | ±.00025" | — |
| Excluding | ||||
|
|
