Universal Micrometers - SERIES 116 — Interchangeable Anvil Type
SERIES 116 — Interchangeable Anvil Type
Description
FEATURES
• Non-rotating spindle with seven interchangeable anvils (flat, spline, spherical, point, knife-edge, disk, and blade) for a wide range of applications.
• Interchangeable anvils (pair) are optional.
• V-anvils and conical spindle tips (matching pair) for screw thread measurement are also available.
• With Ratchet Stop for constant force.
• Provided with a standard except for 25mm (1") model.
V-Anvils and Conical Spindle Tips Sets (Optional) | ||
Applications | Order No. | Assortment of anvils and tips |
Screw thread | 116-830 | 0.4 - 0.5mm/64 - 48TPI (116-831) |
measurements | 0.6 - 0.9mm/44 - 28TPI (116-832) | |
(Metric screw, | 1 - 1.75mm/24 - 14TPI (116-833) | |
Unified screw) | 2 - 3mm/13 - 9TPI (116-834) | |
3.5 - 5mm/8 - 5TPI (116-835) | ||
5.5 - 7mm/4.5 - 3.5TPI (116-836) | ||
Screw thread | 116-840 | 60 - 48TPI (116-841) |
measurements | 48 - 40TPI (116-842) | |
(Whitworth screw) | 40 - 32TPI (116-843) | |
32 - 24TPI (116-844) | ||
24 - 18TPI (116-845) | ||
18 - 14TPI (116-846) | ||
14 - 10TPI (116-847) | ||
10 - 7TPI (116-848) | ||
7 - 4.5TPI (116-849) | ||
4.5 - 3.5TPI (116-850) | ||
Interchangeable Anvils Set (Optional) | ||
Applications | Order No. | Assortment of anvils |
Multi-purpose | 116-800 | Flat anvils (116-801) |
measurements | Spline anvils (116-802) | |
Spherical anvils (116-803) | ||
Point anvils (116-804) | ||
Knife-edge anvils (116-805) | ||
Disk anvils (116-806) | ||
Blade anvils (116-807) |
SPECIFICATIONS |
|