Screw Thread Micrometers - SERIES 125
SERIES 125
Screw_Thread_Mic_49d4dd0e45ebf.jpg
Rating: Not Rated Yet
Description
FEATURES
• Provided with a 60 degree V-anvil and conical spindle for easily measuring pitch diameters of metric or unified screw threads.
• With Ratchet Stop for constant force.
• With a standard for zero point adjustment.
Accuracy
• ±(2+L/75)mm* *L=Maximum measuring length (mm), Fraction rounded up
| SPECIFICATIONS | |||
| Metric | |||
| Range | Order No. | Graduation | Screw to be measured |
| (Metric/Unified) | |||
| 0 - 25mm | 125-101 | 0.01mm | 0.4 - 0.5mm/64 - 48TPI |
| 125-102 | 0.01mm | 0.6 - 0.9mm/44 - 28TPI | |
| 125-103 | 0.01mm | 1 - 1.75mm/24 - 14TPI | |
| 125-104 | 0.01mm | 2 - 3mm/13 - 9TPI | |
| 125-105 | 0.01mm | 3.5 - 5mm/8 - 5TPI | |
| 25 - 50mm | 125-106 | 0.01mm | 0.4 - 0.5mm/64 - 48TPI |
| 125-107 | 0.01mm | 0.6 - 0.9mm/44 - 28TPI | |
| 125-108 | 0.01mm | 1 - 1.75mm/24 - 14TPI | |
| 125-109 | 0.01mm | 2 - 3mm/13 - 9TPI | |
| 125-110 | 0.01mm | 3.5 - 5mm/8 - 5TPI | |
| 50 - 75mm | 125-111 | 0.01mm | 0.6 - 0.9mm/44 - 28TPI |
| 125-112 | 0.01mm | 1 - 1.75mm/24 - 14TPI | |
| 125-113 | 0.01mm | 2 - 3mm/13 - 9TPI | |
| 125-114 | 0.01mm | 3.5 - 5mm/8 - 5TPI | |
| 125-115 | 0.01mm | 5.5 - 7mm/4.5 - 3.5TPI | |
| 75 - 100mm | 125-116 | 0.01mm | 0.6 - 0.9mm/44 - 28TPI |
| 125-117 | 0.01mm | 1 - 1.75mm/24 - 14TPI | |
| 125-118 | 0.01mm | 2 - 3mm/13 - 9TPI | |
| 125-119 | 0.01mm | 3.5 - 5mm/8 - 5TPI | |
| 125-120 | 0.01mm | 5.5 - 7mm/4.5 - 3.5TPI |
