Durometers Tester
Durometers_Teste_49f2c7c4ef4ba.jpg
Rubber hardness tester
(optional)
The Durometer Tester is an auxiliary device for calibrating the rubber hardness tester. It comes with the proper weights for respective check paints. Any hardness tester 01 type A complying with JIS K 6301 can be checked by this tester
The weight position is vertically adjustable according to, the forms 01 test objects.
GS-707
• Weight 1
Nominal weight: 255g (25 deg : 255g) For 25 deg. check point calibration
• Weight 2
Nominal weight : 200g (50 deg. : 455g) For 50 deg. check point calibration in combination with weight 1
• Weight 3
Nominal weight: 200g (75 deg : 655g) For 75 deg. check point calibration in combination with weights 1 and 2
| Type | Applicable Standard | Applicable Models |
| GS-707 | JIS K 6310A | GS-701 N, GS-706N |
| GS-707A | JIS K 7215 A | GS-709N |
GS-702N and GS-703N can be checked by use 01 platfome spring scal,
(for 4 to 5kg) available on the market.
