LIMIT THREAD GAUGE SYSTEM JIS CLASS 2
In the thread gauges system, the limit type is most common. Thread of workpiece is ensured by controlling the GO and NOT GO limit. The types of limit thread gauges systems are broadly divided into ISO class and conventional class 1,2,3.
Differences listed below
1. GO and NOT GO of the ISO gauge system is made with same dimentions for both inspection and working.
2. Pass/Fail assessment of a NOT GO gauge for the ISO class gauge system has been set as not be screwed in more than two revolutions.
For class 1,2,3 gauge system it is not to be screwed in more than two revolutions, included two revolutions.
3. For the ISO class gauge system, the thread gauge for check fitting of the thread ring gauge is the GO and NOT GO limit type.
GP = GO THREAD PLUG GUAGE
WP = NO GO THREAD PLUGE FOR MACHINE WORKING
IP = NO GO THREAD PLUG GUAGE FOR INSPECTION
WR = NO GO THREAD RING GAUGE FOR MACHINE WORKING
IR = NO GO THREAD RING GAUGE FOR INSPECTION
- 4-40 UNC
- 5-40 UNC
- 6-32 UNC
- 8-32 UNC
- 6-40 UNF
- 10-32 UNF
- 1/8-28 PF
- 1/4-19 PF
- 3/8-19 PF
- 1/2-14 PF
- 3/4-14 PF
- 1-11 PF
- 1/8-28 PT
- 1/4-19 PT
- 3/8-19 PT
- 1/2-14 PT
- 3/4-14 PT
- 1-11 PT