IDF Series Digimatic Indicators - SERIES 543 — with Back-lit L

Technical Data
Display:                                                                     LCD
Functions:                                                                   Origin-Set (presetting), Zero-Set, power on/off, inch/mm conversion

(inch/mm type only), resolution switching, MAX/ MIN value hold,runout measurement, SPC data output,

counting direction switching, analog bar range switching, GO/ ±NG tolerance judgment,measuring condition memory
Power supply:                                                                9V DC (via AC adaptor)
Stem diameter: 8mm (mm type) or 3/8" (inch/mm type)
Contact point:  Carbide ball with M2.5x0.45 thread (mm type) or steel ball with #4-48UNF thread (inch/mm type)
Alarm:                                            Over-flow error, tolerance limit setting error, counting value composition error
Dust/Water protection level:        Conforming to IP30 Operating temperature: 0°C to 40°C

FEATURES

• The external power supply eliminates the need to replace batteries for extended continuous operation.
• GO/±NG judgment is performed by setting the upper and lower tolerances. If a judgment result is out of tolerance,

• The PRESET button allows a reference point to be set at any spindle position. With
  

the ABSOLUTE Linear Encoder technology, once the measurement reference point has been preset it

will not be lost when the power is turned on.

• The ZERO/ABS button allows a display value to be zero-set at any spindle position.
  

• The maximum, minimum, or runout value can be displayed during measurement.
• An analog bar indicator has been integrated to handle upper/lower limit approaching and zero approaching.