IDC Series Digimatic Indicators - SERIES 543 — Standard Type w

FEATURES

• As compact as standard Series 2 dial indicators.
• Large, easy-to-read LCD.
• ZERO/ABS key: Allows the display to be Zero-Set at any spindleposition for comparison measurements.

This switch will also allow return to the absolute coordinate and display of the true

position from the origin point.

• GO/±NG judgment can be performed by setting upper and lower tolerance limits.

• The positive/negative count resulting from the spindle's up/down movement can be toggled.
• Unlimited response speed eliminates spindle over-speed errors.
• The IDC indicator face can be rotated 330° to an appropriateangle for easy reading.
• The measurement data can be output to an external data processor using the optional SPC cable.

Technical Data
Display:                                                LCD
Functions:                                            Origin-Set (preset), Zero-Set, power on/off, inch/mm conversion (inch/mm type only),

SPC data output, counting direction switching, GO/±NG judgment
Battery:                                                 SR44 (1 pc.) (938882)
Battery life:                                           Approx. 5000 hours in continuous use
Stem diameter:                                   8mm (ISO/JIS type) or 3/8" (ANSI/AGD type)
Contact point:                                      Carbide ball with M2.5x0.45 thread (ISO/JIS type) or steel ball with #4-48UNF

thread (ANSI/AGD type)
Alarm:                                                    Low battery voltage, scale contamination, over-

flow error,tolerance limit setting error
Dust/Water protection level:                Conforming to IP42
Operating temperature:                       0°C to 40°C