IDC Series Digimatic Indicators - SERIES 543 — with Max./Min.
SERIES 543 — with Max./Min. Value Holding FunctionWith max./min. value holding function model of the IDC SeriesDigimatic Indicators.
___IDC_Series_Di_49d4f049216ef.jpg
Rating: Not Rated Yet
Description
FEATURES
- The maximum, minimum, or runout value can be displayed during measurement
- GO/±NG judgment is performed by setting the upper and lower tolerances
- High speed sampling ratio of 50 times/s.
| Technical Data | |
| Display: | LCD |
| Functions: | Origin-Set (preset), Zero-Set, power on/off, inch/mm |
| conversion (inch/mm type only), SPC data output, counting | |
| direction switching, GO/±NG judgment, max./min./runout | |
| value holding | |
| Battery: | SR44 (1 pc.) (938882) |
| Battery life: | Approx. 5000 hours in continuous use |
| Stem diameter: | 8mm (ISO/JIS type) or 3/8" (ANSI/AGD type) |
| Contact point: | Carbide ball with M2.5x0.45 thread (ISO/JIS type) or steel ball |
| with #4-48UNF thread (ANSI/AGD type) | |
| Alarm: | Low battery voltage, scale contamination, over-flow error, |
| tolerance limit setting error | |
| Dust/Water protection level: Conforming to IP42 | |
| Operating temperature: 0°C to 40°C | |
| SPECIFICATIONS | |||||||
| Metric | |||||||
| Resolution | Range | Order No. | Order No. | Accuracy | Measuring | Mass | Remarks |
| Back w/lug | Flat-back | force | |||||
| 0.001mm | 12mm | 543-260 | — | 0.003mm | 1.5N or less | 160g | ISO/JIS type |
| Inch/Metric | |||||||
| Resolution | Range | Order No. | Order No. | Accuracy | Measuring | Mas
|
