Dial Indicator Repair Tool Kit
Mitutoyo offers a tool set designed to let you perform simplerepairs to your Mitutoyo dial indicator, and a device that lets you reset the indicator crystals.
___Dial_Indicato_49d4e903cabe9.jpg
Rating: Not Rated Yet
Description
FEATURES
- To free a jammed bezel: Apply Molykote with a brush (8) around the entire groove of the bezel.
- To oil a bearing: Use brush (9) to apply lubricating oil (2) to the pinion shaft.
- To remove the long hand: Use hand remover (15) to lift out without damaging the bearing.
- To remove the short hand: Use nippers (13).
- To adjust the bearing position: Use the bearing adjuster (18) to force the bearing into position.
- To remove the pin or drive it into position: Use the pin remover (16) and hammer (10) on the V-groove of the spindle rest (11).
- To drive the long or short hand into position: Use the pinion rest (19) and pin rest (12) to hold the pin and pinion, then drive with hammer (10) and punch (17) into the center position.
| SPECIFICATIONS | |
| Order No. | Assortment of tools (1) - (20) |
| 7823 | (1) Molykote (lubricant) (901171) |
| (2) Lubricating oil (901172) | |
| (3) Screwdriver (Phillips) (901173) | |
| (4) Screwdriver (Phillips/flat blade) (901174) | |
| (5) Tweezers (129729) | |
| (6) Pin-vise (901175) | |
| (7) Brush (901176) | |
| (8) Brush (901177) | |
| (9) Brush (901177) | |
| (10) Hammer (901178) | |
| (11) Spindle rest (129730) | |
| (12) Pin rest (129731) | |
| (13) Nippers (901179) | |
| (14) Pliers (901180) | |
| (15) Hand remover (901181) | |
| (16) Pin remover (129732) | |
| (17) Punch (129733) | |
| (18) Bearing adjuster (129734) | |
| (19) Pinion rest (129735) | |
| (20) Reamer ø1 (129736), ø0.6 (193702) | |
| (21) Case (901182) |
